TrueCan Industrial Technologies Inc.
Protect the asset · Increase production · Decrease OPEX

What the return looks like in practice

MagStream is TrueCan's flagship magnetic filtration offering — manufactured by Eclipse Magnetics and supplied by TrueCan. It earns its return in fewer disposable filters, less downtime, fewer contamination-driven failures, and fluid recovered instead of wasted. Below is the documented evidence — Eclipse reference cases, not a promise — and a worksheet to build the numbers for your own site.

Where the return comes from

Four places, in almost every documented case. If a cost isn't on your site, it isn't in your return — which is why the worksheet further down starts from your figures, not ours.

01

Fewer disposable filters

A magnetic element is cleaned and returned to service instead of thrown away. Downstream cartridges and depth media last longer because the ferrous load never reaches them.

02

Less change-out downtime

Every filter change costs labour and, on a running process, production. Longer intervals between change-outs are where several cases below found most of their saving.

03

Fewer failures

Black powder and ferrous fines wear pump seals, bearings, valves and injector components. Removing them sub-micron protects the equipment the fluid touches — seals most of all.

04

Fluid recovered, not wasted

Contaminated oil and wash fluid that would be downgraded or disposed of can be cleaned and returned to service instead.

May increase
seal life
Removing abrasive fines may increase seal life — measured, not assumed

Ferrous fines act like grinding paste on seal faces, so taking them out of circulation may increase seal life. We attach no percentage to that for seals: the actual extension depends on your fluid and duty, and it is measured in the pilot against your baseline. Separately, Eclipse Magnetics' published tool-cutting material states magnetic filtration "can increase the value of tools by 300% with extended fluid life" — that is Eclipse's evidence, and it is about tool value, not seal life. Eclipse sector expertise · Eclipse filtration brochure (PDF)

Oil & gas — manufacturer evidence

An Eclipse Magnetics manufacturer case on a gas duty. No economics were published for it, so no return is calculated from it here — the payback evidence on this page is in the manufacturing cases below.

Tunisia gas receiving station

Eclipse Magnetics · December 2023

A bespoke in-line magnetic separator delivering sub-micron ferrous capture, which greatly reduces loading on downstream cartridge filters.

Source: Eclipse Magnetics news release →

No economics published — no ROI can be calculated from this case alone.

The payback pattern — manufacturing cases

Eclipse Magnetics' published cases from machining, steel and coating plants. Different industries, same pattern: the return shows up in consumables, downtime and rejects. The equipment in these cases is Eclipse's — the manufacturer behind MagStream, TrueCan's flagship filtration offering. None of these installations is a MagStream or TrueCan installation.

Bowers Group — EDM machining

Eclipse Micromag MM20

Machining times improved 17%, cartridge consumption halved (worth over £2,500 a year), and over 100 hours of productivity a month were recovered — over £11,500 a month, as published by Eclipse.

Source: Eclipse Magnetics case study →

£142,500 / yearAnnual cost savings as stated by Eclipse — investment paid back within days

Steelscape — steel rolling & pickling

Eclipse Automag AM6 Skid

Approximately 12,000 kg of ferrous oxide is extracted every month, and reject rates have fallen to virtually zero.

Source: Eclipse Magnetics case study →

~12,000 kg / monthFerrous oxide extracted

Schaudt Mikrosa — camshaft grinding

Eclipse Filtramag FM2.5

Maintenance and downtime costs reduced by at least 50%, grinding-wheel life increased 25–30%, and product rejections fell 10–15%.

Source: Eclipse Magnetics case study →

≥50% lowerMaintenance and downtime costs after installation

Scania — gear grinding & honing

Eclipse Filtramag FM2.5

On oil circulated at 10–12 bar and 380–400 litres per minute, tool changes and product rejects caused by ferrous contamination were reduced to virtually zero.

Source: Eclipse Magnetics case study →

+30% oil lifeOil lifespan increased 30%; contamination rejects virtually zero

Turbocharger balancing

Eclipse Micromag MM5

Filters had been changed every few days. Magnetic filtration stretched the interval, cutting consumables and downtime per machine. Eclipse does not name the customer in this case.

Source: Eclipse Magnetics case study →

£7,000 ($11,000) / yearEstimated saving per machine, as published by Eclipse

Ionbond UK — PVD coating wash

Eclipse Filtramag+

A smaller duty with a smaller, honest number: fluid life up 25% and downtime from fluid changes down 25%, two months into operation.

Source: Eclipse Magnetics case study →

£2,500 / yearAnticipated annual cost savings, as published by Eclipse — anticipated, not yet achieved

Read these the right way: none of the cases on this page is a TrueCan installation, and none is a guarantee for another site. They show what the technology has returned on comparable duties. What it returns on yours is decided in a technical review — against your fluid, flow, pressure, temperature and contamination — and then measured in a pilot.

Build your own numbers

We can't calculate a credible payback for your system from other sites' cases. Enter what contamination costs you today — your figures — then set, for each cost category separately, the share of that cost you want to test removing. Real duties rarely improve evenly, so each category has its own reduction. The result is an illustrative estimate built from your inputs, not a TrueCan forecast.

Currency

Every figure in the worksheet — inputs and results — is in the currency selected here. Nothing is converted; enter your costs in that currency.

Your costs today

The grey numbers in the fields are examples only, to show the format — they are not your data and are never used in the results. Leave any category at zero if it doesn't apply to your system.

1 · Disposable filters

Elements, cartridges and depth media you buy each year for this system.

per year
% of this cost removed (0–90)

2 · Filter change-outs

Labour plus downtime or lost production, each time filters are changed.

per change
per year
% of this cost removed (0–90)

3 · Contamination-related failures

A pump seal, bearing, valve or injector failure you link to contamination — parts, labour and downtime.

per failure
per year
% of this cost removed (0–90)

4 · Fluid and product losses

Oil, fuel or product written off, plus disposal and waste-handling costs.

per year
% of this cost removed (0–90)

Simplified scenario (optional)

Set every category to one level

This is a simplification — it applies one percentage to all four categories at once. Real duties rarely improve evenly; adjust each category above to match your own judgement.

5 · MagStream costs

Cleaning labour, spares and power for the magnetic system itself. Leave at 0 if you don't have a figure yet — a technical review produces one, and net savings will be overstated until it's included.

per year

One-time installed cost. Leave blank if you don't have a quote yet; payback and ROI show as “—” until it's entered.

one-time

Your worksheet — CAD

Illustrative estimate from your own figures — not a TrueCan forecast.

Enter any cost figure on the left and your annual contamination cost — and what a reduction could be worth — will appear here, in the currency selected above.

This worksheet does the arithmetic on numbers you supply — it is not a TrueCan estimate, a performance warranty, or a site-specific forecast. The reduction percentages are scenarios you choose to test, not predicted results. Actual savings depend on your fluid, contamination, flow, pressure and temperature, and are established by technical review and measured in a pilot.

How we would build your ROI

Five numbers from you, measured before and during a pilot. Start with one system, measure the results, then decide.

Your filter baseline

What filters you change now, how often, and what each change costs in parts, labour and downtime.

Failures tied to contamination

Seal, bearing and pump failures or wear you link to black powder and ferrous fines.

Fluid and product losses

Fluid, fuel or product lost, downgraded or written off because of contamination.

Disposal costs

What spent elements, contaminated fluid and waste handling cost you each year.

What success has to show

Agreed up front: the result a pilot must demonstrate before you commit to more.

What the pilot measures

  • Mass of contamination captured per cleaning
  • Seal and equipment life vs. baseline — whether removing ferrous fines increases seal life on this duty, measured rather than assumed
  • Downstream filter life and differential pressure
  • Maintenance hours spent on filtration
  • Equipment condition before vs. after
  • Baseline fluid testing and operating measurements, included with the pilot

Request a technical review

Tell us about your system and, if you've run the worksheet, your numbers. Suitability is determined from fluid, contamination, flow, pressure and temperature — the more of that you can share, the more useful the review. Fields marked are required.

What the fluid circuit does — e.g. fuel gas ahead of steam generators, hydraulic power unit, produced water.

Submitting opens your email app with the request addressed to [email protected] and filled in — just press send there. Nothing is sent from this page itself.